ATTEN

ATTEN AT9205A

ATTEN AT9205A

The AT9205A digital multimeter is a ten function instrument from Shenzhen Atten Electronics Co., Ltd. So it naturally includes all basic functions of a multimeter, namely Voltage (AC/DC), Ampere (AC/DC) and ohms. Other functions on this meter are frequency, capacitance, temperature, diode test, transistor test, and continuity test. Hence you get a wide spectrum of functions at a very cheap price.

The meter looks quite good in black and yellow contrast. The shape of the hand held meter is smart and handy. Its display is big enough to be seen easily. Backlit is present as an optional facility.

Common Functions

The meter measures DC and AC voltages in five ranges that starts from 200mV. The maximum range for DC is 1000V, while that is 700V for AC. Accuracy in DC varies from 0.5% to 0.8%. The same for AC swings between 1.2% and 0.8%. So accuracy is quite good for an electrician’s multimeter.

The function of ampere measurement, both in AC and DC has four ranges. These are 2mA, 20mA, 200mA and 20A. Accuracy here is also good as these run between 1.2% and 1.4% for DC and 1.2% to 3% for AC.

Resistance measurement has wide variety of ranges, which spans from 200 ohm through 200Mohm. Correctness spans from 1% to 5% in this function, which is more or less acceptable.

Other functions

Two ranges in frequency measurement are available on this DMM. These are 2 kHz and 20 kHz and deviation is 2% and 1.5% respectively.

Other than the above you can measure capacitance and temperature with this tool. Diode testing is another useful function you may have on it. Continuity test is present with audible buzzer.

Features

  • Full protection from overload
  • Max. allowable voltage between a terminal and earth are 1000V DC and 700V AC
  • Large LCD display with 2-3 times update/sec
  • Over range indication
  • Reverse polarity indication
  • Low battery indication
  • 9V battery

So it can be easily said that it’s a good multimeter for an electrician at the current price point.

AT9205A digital multimeter is a ten function instrument from Shenzhen Atten Electronics Co., Ltd. So it naturally includes all basic functions of a multimeter, namely Voltage (AC/DC), Ampere (AC/DC) and ohms. Other functions on this meter are frequency, capacitance, temperature, diode test, transistor test, and continuity test. Hence you get a wide spectrum of functions at a very cheap price.

The meter looks quite good in black and yellow contrast. The shape of the hand held meter is smart and handy. Its display is big enough to be seen easily. Backlit is present as an optional facility.

Common Functions

The meter measures DC and AC voltages in five ranges that starts from 200mV. The maximum range for DC is 1000V, while that is 700V for AC. Accuracy in DC varies from 0.5% to 0.8%. The same for AC swings between 1.2% and 0.8%. So accuracy is quite good for an electrician’s multimeter.

The function of ampere measurement, both in AC and DC has four ranges. These are 2mA, 20mA, 200mA and 20A. Accuracy here is also good as these run between 1.2% and 1.4% for DC and 1.2% to 3% for AC.

Resistance measurement has wide variety of ranges, which spans at 200 ohm through 200Mohm. Correctness spans from 1% to 5% in this function that is more or less acceptable.

Other functions

Two ranges in frequency measurement are available on this DMM. These are 2 kHz and 20 kHz and deviation is 2% and 1.5% respectively.

Other than the above you can measure capacitance and temperature with this tool. Diode testing is another useful function you may have on it. Continuity test is present with audible buzzer.

Features

·         Full protection from overload

·         Max. allowable voltage between a terminal and earth are 1000V DC and 700V AC

·         Large LCD display with 2-3 times update/sec

·         Over range indication

·         Reverse polarity indication

·         Low battery indication

·         9V battery

So it can be easily said that it’s a good multimeter for an electrician at the price.

ATTEN AT9205C

ATTEN AT9205C

The ATTEN AT9205C is a multimeter with 11 functions. It’s digital display is on liquid crystal and with backlit. As a result the display is visible in darkness even. Its perfect geometric shape with contrast colored sides has given it an attractive look.

This instrument provides facility to measure D.C. and A.C. voltages with an accuracy of ±0.5% to ±0.8%. Accuracy in measuring amperes in D.C and A.C are a little bit worse than that of voltage. These range from ±1.4% to ±1.8%. The accuracy in measurement of resistance is ±0.8% which is alright for an electrician’s job.

Frequency, capacitance and transistor testing facility is present in AT9205C. The accuracies in these cases serve more or less every day purposes. You can use it as a diode tester also. Interesting advantage you get here is its audible continuity test response. So you don’t have to see the display for a continuity test result.

This equipment has got a unique opportunity to measure temperature.  A thermocouple of type K is possible to use with this meter for the purpose. You may have a thermocouple along with this instrument. The testing lead probes of the instrument are quite strong and durable. Hold Reading feature of the tool makes its use more convenient and versatile. Auto Power Off helps to preserve the battery inside it  for a longer life.

This handheld instrument is suitable for most of the fields of its use. You can use it in laboratory, in a production line of a factory, in workshops and for factory maintenance. This nice tool may be said to be quite cheap in consideration of its multipurpose functionality at home and for business use.

Go to Top